Ready Ramp
Loading ramp and tailgate extender
Installation Instructions
Quick directions for
use - Each ReadyRamp® includes:
ReadyRamp® (1), Post mounts (2), Keyhole mounts
(2), Latch mounts (2), Nylon strap mounts (2), O-rings (6), Toyota Tundra
mount set (1), Instructions. Only four mounts are used for any truck
installation - the extra hardware allows one ReadyRamp®
to fit all trucks in its category (Compact or Full-Sized).
Post Mount Tailgates:
Step 1: With the
tailgate open, position the ReadyRamp® so that it
encloses the open tailgate. Insert the post mount into the tailgate and
push down. After the tailgate latch is engaged, secure it with the nylon
strap and buckle.
Step 2: Use the
keyhole mount strap at the upper post to secure the
ReadyRamp® at both sides. Make sure the cam buckles are facing out.
Step 3: The
included O-rings are used to keep the extra strap material from flapping.
IMPORTANT: Always
make sure all mounts are secure and nylon straps are tight before moving
the truck and always get help when using the ramp function!
Latch Mount Tailgates:
Step 1: With the
tailgate open, position the ReadyRamp® so that it
encloses the open tailgate. Insert the latch mount into the latch
mechanism. The cam buckles face outward. Secure it with the nylon strap
and buckle.
Step 2: At the
point where the tailgate connects to the truck body, lop the straps
through the hardware to secure the ReadyRamp® at
both sides.
Step 3: The
included O-rings are used to keep the extra strap material from flapping.
IMPORTANT: Always
make sure all mounts are secure and nylon straps are tight before moving
the truck and always get help when using the ramp function!
Toyota Tundra Installation Tips:
Toyota Tundra users will need to install the nylon
post and screw to the latch mount, and then mount per 'post mount'
instructions above.
Tundra Hardware
Tundra Hardware
CAUTION: The truck tailgate maximum load
rating may be LESS than 1,000 pounds - check the owner's manual before
overloading the tailgate. Always check the ReadyRamp®
before use - don't use a damaged unit. Always secure the
ReadyRamp®, whether in use or closed in the truck bed. Never mount
a ReadyRamp® on a tailgate that is narrower than
the ramp itself. If you think it might be dangerous, DON'T use a
ReadyRamp® to do it!
Step 1: With the
tailgate open, position the ReadyRamp® so that it
encloses the open tailgate. Insert the post mount into the tailgate and
push down. After the tailgate latch is engaged, secure it with the nylon
strap and buckle.
Step 2: Use the
keyhole mount strap at the upper post to secure the
ReadyRamp® at both sides. Make sure the cam buckles are facing out.
Step 3: The
included O-rings are used to keep the extra strap material from flapping.
IMPORTANT: Always
make sure all mounts are secure and nylon straps are tight before moving
the truck and always get help when using the ramp function!
Step 1: With the
tailgate open, position the ReadyRamp® so that it
encloses the open tailgate. Insert the latch mount into the latch
mechanism. The cam buckles face outward. Secure it with the nylon strap
and buckle.
Step 2: At the
point where the tailgate connects to the truck body, lop the straps
through the hardware to secure the ReadyRamp® at
both sides.
Step 3: The
included O-rings are used to keep the extra strap material from flapping.
IMPORTANT: Always
make sure all mounts are secure and nylon straps are tight before moving
the truck and always get help when using the ramp function!
