Tiregate Hitch Gate Series

Upgrade your tailgate with a TireGate!

Carry an Over Size Spare Tire by Utilizing Your 2" Hitch Receiver!

(May interfere with back-up video and/or sensors)
This new swing-away spare tire carrier mounts to your 2" (Class III or greater) receiver in minutes. The HitchGate is perfect for SUVs, Jeeps, vans and pickup trucks. It opens wide to allow full access to the vehicle's cargo space. This tough universal tire carrier allows you to carry up to a 40" spare tire while maintaining the vehicle's ground clearance, cargo space, and minimal change to your departure angles. The HitchGate simply slides directly into your 2" tow receiver. Tighten our exclusive "Wedge Lock" draw bolt, install your hitch cross pin and you're ready to go!

• MIG welded tubular construction – 2” diameter heavy wall steel tube combined with 2"x4" and 2"x3" heavy wall cross braces for the ultimate in durability and an aggressive off-road look.

 

• Every HitchGate is powder coated with black polyester semi-gloss and is equipped with zinc plated hardware for long lasting performance in extreme conditions.

• Grade 8 high-strength bolts

• Single latching pin with high shear strength rating to ensure your TireGate stays on and in place when you need it to most.

• Unique Wedge Lock system to prevent movement or rocking inside the hitch.

• 150 lb cargo capacity

Available Lug Patterns



• Theft resistant

• Made in the USA – To maintain the highest level of quality and craftsmanship, all products are designed and fabricated in the United States.

• Our innovative design is engineered to maximize your truck’s cargo space while maintaining the level of quality that you won’t find on any other hitch carrier product.

• Available for most vehicle makes and models with 2" receivers.

• Ready to install a Hi-Lift jack with optional bolt kit (p/n: HL60000). 

• Lighted license plate relocation kit available (p/n: LPR25676).

• This product meets the requirements for a SAE Class IV coupling classification. Max. vertical tongue weight of this product is 750 lbs. Maximum towing weight attached to this product is 7500 lbs.

Shown with optional License Plate Relocation Kit


UHG1060
OFF-SET
 

Click below for
Wilco Products Warranty and Warnings

HitchGate Installs into 2 inch Tow receiver
    Models
Part Number
Off-set
Hitch-Gate
Requires Vehicle to have a Class III Towing Hitch with 2 inch receiver and Minimum 500 lb tongue weight
Note: For vehicles with tailgates 53-inches or wider, please select the Offset Hitchgate™.
UHG1060
$799.00
Wobble Free Hitch Extension Wobble Free 2" Hitch Extension
HE31973
$109.00
License Plate Relocation Kit Used on p/n UHG1060, UHG1070
LPR25676
$99.00
Hi-Lift Jack
Horizontal Mount Kit
Hi-Lift Jack Horizontal Mounting Kit for use with p/n UHG1060 OR UHG1070
Hi Lift Jack Mount
HL60000
$25.00
Hi-Lift Jack
Vertical Mount Kit
Hi-Lift Jack Vertical Mounting Kit for use with p/n UHG1060 OR UHG1070
Hi-Lift Jack Vertical Mount
HLT6010
$99.99

 

NEW!  Hitchgate Solo
Hitchgate Solo

UHG32125 - Standard Length Hitchgate Solo
 Will clear up to a 35" tire on vehicles with a width of up to 72" inches.  $499.00

UHG32206 - Hitchgate Solo XL
extended truck, tire, and receiver for added door clearance on large cargo vans (Ex: Ford Transit and Mercedes Sprinter) -
$562.00

NEW!  Hitchgate Solo

When it comes to strength and weight, the Hitchgate™ Solo packs a powerful punch. With the same tow rating as its bigger siblings, and the capacity to carry a 35-inch tire, the Hitchgate Solo is ready for whatever the adventure calls for. The Hitchgate Solo was designed for those looking to go lean on the next adventure while still being prepared. The Hitchgate Solo’s reduced weight is perfect for those looking to carry a 35-inch or smaller spare tire. By relocating the tire mount in-line with the receiver the Hitchgate Solo is also uniquely designed to clear vehicles with short bumpers and low doors (Ex: Sprinter Vans). The Hitchgate Solo is also a phenomenal candidate for Subarus and smaller vehicles where every pound counts. 

The Hitchgate Solo spare tire carrier universally fits on all vehicles with a Class III hitch receiver. This swing-away, spare tire carrier mounts to any 2-inch, Class III hitch receiver and is perfect for SUVs, Jeeps, vans and pickups. This tough tire carrier secures up to a 35-inch spare tire while maintaining ground clearance with minimal change in departure angles when driving off-road. Release a single latch pin and it opens wide for full access to the vehicle’s cargo space.

The Hitchgate Solo is tow-rated at 7,500 lbs (trailer weight) and 750 lbs (tongue weight). Available with mounting options for Hi-lift jack and license plate relocation kit. (see above for these accessories)

Like all Wilco Offroad products, the Hitchgate Solo is proudly built by hand in Santa Ana, California by certified welders and comes with a limited lifetime warranty. 

The Tiregate sits flush with the Hitch of your vehicle.

Back to Tiregate Main Page

 

Our online ordering system will keep all information provided completely secure using SSL encryption technology. Additionally, All information provided by you will be completely confidential. Pickup Specialties does not provide customer information, mailing list or other data to any outside firms or individuals.