Titan In-Bed Auxiliary Tanks

 
The In-Bed Auxiliary Fuel Tanks by TITAN provide the ability to carry 60 gallons of diesel fuel securely and safely in the bed of your truck. The Auxiliary Tanks are versatile as they are offered in many configurations with various pumps and tool/storage box options. They are constructed of extra heavy duty, cross linked Polyethylene which is much better than metal as it does not rust or corrode.
 
In-Bed Auxiliary Tanks






Universal Gravity Feed Kit
Available as an add-on at checkout for $350.55

For vehicles with 1.5″ or 2.0″ fill neck hoses. This kit includes all of the parts needed to hook up an in-bed tank to the vehicle fill neck with an electric shut-off valve controlled from the vehicle cab, including; Solenoid valve, wiring, switches, hoses and rollover valve, 1.5″ and 2.0″ single tees, hose clamps and grommet.
Solenoid valve automatically closes when ignition is shut off.

For diesel use ONLY

99 0122 0000 - Universal Gravity Feed Kit - available as an add-on at checkout for $350.55

 

60 Gallon*, In-Bed, Diesel Transfer Tank with 12 Volt Pump and Nozzle (5310060)

60 Gallon*, In-Bed, Diesel Transfer Tank with 12 Volt Pump and Nozzle.

This 60 gallon transfer tank is made to last. It has all the advantages of TITAN’s famous cross-linked polyethylene such as its invulnerability to corrosion, resistance to heat transfer and condensation, durability and maintenance of its good looks. It includes a pre-wired 12 volt transfer pump that does approximately 8 gallons per minute (basically equivalent to standard gas stations).

The motor is UL Listed to U.S. and Canadian safety standards and comes complete with power cord, and manual nozzle. This fully baffled tank comes with a “Free Spinning” locking cap, mechanical fuel gauge, and all mounting hardware is included. One of our large locking toolboxes (Purchased separately below 99 9115 0000 or 99 9116 0000) can fit on the tank to enclose the transfer pump as well as hold tools. The transfer tank fits most all full-sized diesel pickups regardless of bed length (except RamBox).

TITAN’s™ cross-linked polyethylene (XLHDPE) in-bed tanks give you the advantages of advanced design and materials, as well as TITAN’s legendary quality and durability.

  • Fully Baffled
  • Fuel Gauge is Standard
  • Tank Body Weighs only 51 lbs. (60 gallon)
  • Easy to Install or Remove
  • .250” Nominal Wall Thickness
  • No Condensation
  • Tank is corrosion proof
  • Fits Under Std. Tonneau Cover
  • “Free Spinning” Locking Cap is Standard
  • All Hardware is Zinc Plated
  • Features Tie-Downs for Your Payload
  • No Welds to Crack
  • Nearly 200 Times Less Heat and Cold Conductive than Metal Tanks
  • Durable Finish
  • Looks Good with Any Truck
  • Compatible with most bio-diesel fuel+.
  • Fits most pickup beds
  • 59.50” long at top, 48.50” at bottom x 21.00” wide x 18” high ( model 5110060)
  • Patent Pending
  • Use as “auxiliary” or “transfer”
  • Convenient built-in lifting handles tank
  • Mounting template and detailed instructions
  • Lifetime warranty included on tank body

5310060 - $2,183.10

 

   
In Bed Auxiliary Tank





Universal Gravity Feed Kit
Available as an add-on at checkout for $350.55

For vehicles with 1.5″ or 2.0″ fill neck hoses. This kit includes all of the parts needed to hook up an in-bed tank to the vehicle fill neck with an electric shut-off valve controlled from the vehicle cab, including; Solenoid valve, wiring, switches, hoses and rollover valve, 1.5″ and 2.0″ single tees, hose clamps and grommet.
Solenoid valve automatically closes when ignition is shut off.

For diesel use ONLY

99 0122 0000 - Universal Gravity Feed Kit - available as an add-on at checkout for $350.55

60 Gallon*, In-Bed, Diesel Fuel Tank with TITAN Electronic Controller and Pump Transfer System (5410060)

60 Gallon*, In-Bed, Diesel Fuel Tank with TITAN™ Electronic Controller and Pump Transfer System.

At your command, this in-bed tank transfers up to 60 gallons of fuel on-the-go.++ The TITAN™ Solid State, Electronic Controller lets you know how much fuel remains in your tank at all times. With the touch of a button, the controller pumps a preset amount of fuel into your main tank or another touch stops it at any time.

The controller is very compact and can be easily installed anywhere in your cab. This fully baffled tank comes with a “Free Spinning” locking cap and all mounting hardware is included. At 19 ½” high, the tank will fit under most standard tonneau covers. This system fits most all full-sized diesel pickups regardless of bed length (except RamBox).

TITAN’s™ cross-linked polyethylene (XLHDPE) in-bed tanks give you the advantages of advanced design and materials, as well as TITAN’s legendary quality and durability.

  • Fully Baffled
  • Fuel Gauge is Standard
  • Tank Body Weighs only 51 lbs. (60 gallon)
  • Easy to Install or Remove
  • .250” Nominal Wall Thickness
  • No Condensation
  • Tank is corrosion proof
  • Fits Under Std. Tonneau Cover
  • “Free Spinning” Locking Cap is Standard
  • All Hardware is Zinc Plated
  • Features Tie-Downs for Your Payload
  • No Welds to Crack
  • Nearly 200 Times Less Heat and Cold Conductive than Metal Tanks
  • Durable Finish
  • Looks Good with Any Truck
  • Compatible with most bio-diesel fuel+.
  • Fits most pickup beds
  • 59.50” long at top, 48.50” at bottom x 21.00” wide x 19.5” high
  • Patent Pending
  • Use as “auxiliary” or “transfer”
  • Convenient built-in lifting handles tank
  • Mounting template and detailed instructions
  • Lifetime warranty included on tank body

5410060 - $2,119.45

 

   

Shown mounted on In-Bed Fuel Tank

Compact Locking, Aluminum Diamond Plate, Toolbox (99 0117 0000)
For use with any TITAN 60 gallon In-Bed Fuel Tank

Constructed of bright aluminum, this 3.4 cu. ft. (total) capacity.
For use with any TITAN 60 gallon In-Bed Fuel Tank (purchased separately - see above)

Constructed of bright aluminum, this 3.4 cu. ft. (total) capacity, tool box bolts to the top of any of the above TITAN 60 gallon In-Bed Fuel Tank models to form a fuel tank/toolbox combination. Constructed of heavy-gauge aluminum diamond plate, it features plated locks for security and an air spring supported lid for convenience.

Box has two compartments; one for tools and one which completely houses the fill neck, and fuel gauge. Box protects fuel, tank components, and tools from theft and the weather. Holds up to 100 lbs. of tools. Dimensions: 56.00” x 21.00” x 7.00” high

 

99 0117 0000 - $779.95

   

Shown mounted on In-Bed Fuel Tank

Compact Locking, Black Diamond Plate Aluminum, Toolbox (99 0118 0000)
For use with any TITAN 60 gallon In-Bed Fuel Tank

Constructed of black finished aluminum, this 3.4 cu. ft. (total) capacity.
For use with any TITAN 60 gallon In-Bed Fuel Tank (purchased separately - see above)

Constructed of black finished aluminum, this 3.4 cu. ft. (total) capacity, tool box bolts to the top of any of the above TITAN 60 gallon In-Bed Fuel Tank models to form a fuel tank/toolbox combination. Constructed of heavy-gauge aluminum diamond plate, it features plated and black finished locks for security and an air spring supported lid for convenience.

Box has two compartments; one for tools and one which completely houses the fill neck, and fuel gauge. Box protects fuel, tank components, and tools from theft and the weather. Holds up to 100 lbs. of tools. Dimensions: 56.00” x 21.00” x 7.00” high.

 

99 0118 0000 - $845.50

   
Shown Below mounted on In-Bed Fuel Tank

Tool Box for Fuel and Tool Combo
Fuel & Tool

Large Locking, Aluminum Diamond Plate, Toolbox (99 9115 0000)
For use with any TITAN 60 gallon In-Bed Fuel Tank

 

Bright aluminum, 6.8 cu. ft. (total) capacity.
For use with any TITAN 60 gallon In-Bed Fuel Tank (purchased separately - see above)

Bright aluminum, 6.8 cu. ft. (total) capacity, tool box bolts to the top of any of the above TITAN 60 gallon In-Bed Fuel Tank models to form a fuel tank/toolbox combination. Constructed of heavy-gauge aluminum diamond plate, it features plated locks for security and an air spring supported lid for convenience.

Box has two compartments; one for tools and one which completely houses the fill neck, fuel gauge and the “99 0113 0000 Transfer Pump Kit” when installed. Fill neck extension included for easy filling. Box protects fuel, tank components, and tools from theft and the weather. Holds up to 100 lbs. of tools. Dimensions: 56.00” x 21.00” x 12.00” high

 

99 0115 0000 - $948.10

   
Shown Below mounted on In-Bed Fuel Tank
Black Fuel & Tool
Black Fuel & Tool

Large Locking, Black Diamond Plate Aluminum, Toolbox (99 9116 0000)

For use with any TITAN 60 gallon In-Bed Fuel Tank

 

Black finished aluminum, 6.8 cu. ft. (total) capacity.
For use with any TITAN 60 gallon In-Bed Fuel Tank (purchased separately - see above)

Black finished aluminum, 6.8 cu. ft. (total) capacity, tool box bolts to the top of any of the above TITAN 60 gallon In-Bed Fuel Tank models to form a fuel tank/toolbox combination. Constructed of heavy-gauge aluminum diamond plate, it features plated and black finished locks for security and an air spring supported lid for convenience.

Box has two compartments; one for tools and one which completely houses the fill neck, fuel gauge and the “99 0113 0000 Transfer Pump Kit” when installed. Fill neck extension included for easy filling. Box protects fuel, tank components, and tools from theft and the weather. Holds up to 100 lbs. of tools. Dimensions: 56.00” x 21.00” x 12.00” high.

 

99 0116 0000 - $1,043.10

 

   
Click HERE for all Titan Fuel Tanks
Click HERE for all Transfer Tanks and Auxiliary Tanks

Our online ordering system will keep all information provided completely secure using SSL encryption technology. Additionally, All information provided by you will be completely confidential. Pickup Specialties does not provide customer information, mailing list or other data to any outside firms or individuals.