Winches by Warn

Premium Series  PREMIUM SERIES   CLASSIC DESIGN.  PROVEN PERFORMANCE

 
  • Long time best selling winches

  •  
  • Pulling capacities to 9,000 lbs.
  • Competition grade power, speed
        and reliability
  • WARN Limited Lifetime Warranty

     
  •  
    Premium Series: XD9000i
     
    XD9000i SELF-RECOVERY WINCH
    You'll probably see more XD9000i winches on trail rigs than any other winch. No load line speed of 38-feet per minute and three-stage planetary gearing and the ability to run cool with low amp draw for long winching cycles are just a few reasons why.

     
    XD9000i SPECS/PART NUMBERS
    Part Number: PN 27550  $1179.00
    Rated Line Pull: 9000 lbs. (4080 kgs.) single-line
    Motor: 12V 4.6 hp, 24V 2.5 hp, Series WoundTM
    Remote Control: Remote switch, 12' (3.7m) lead
    Geartrain: 3-Stage Planetary
    Gear Ratio: 156:1
    Lubrication: Aeroshell #17
    Clutch (freespooling): Sliding Ring Gear
    Brake: Automatic Direct Drive Cone
    Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
    Weight: 85 lbs. (38.5 kgs.)
    Wire Rope: 125', 5/16" diameter (38m, 8mm diameter)
    Fairlead: Roller
    Recommended Battery: 650 CCA minimum for winching
    Battery Leads: 2 gauge, 72" (1.83m)
    Finish: Argent Powder Coat
    Nuts/Bolts: PN 39570
    CE Winches: CE products are designed to meet European Standards. CE winches include CE labels, Manuals, Safety Hook and Thimble.

     
    12V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 38(11.6) 70 amps 1/9000(4082)
    2000(910) 14.4(4.39) 180 amps 2/8190(3715)
    4000(1810) 11(3.35) 255 amps 3/7500(3402)
    6000(2720) 8.67(2.64) 330 amps 4/7010(3180)
    8000(3630) 6.88(2.10) 415 amps 5/6570(2980)
    9000(4080) 6.38(1.94) 460 amps  

     
     
    Above performance specs are based on first layer of drum

     

     
    Winch Dimensions: 21.8" L. x 6.3" D. x 9.94" H.
    (553mm L. x 160mm D. x 252mm H.)
    Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

    Premium Series: XD9000
    XD9000 SELF-RECOVERY WINCH
    A long-time best seller, the XD9000's compact body and separate control pack lets it work effectively in very tight spaces. It uses the 4.6 hp Series WoundTM motor and three-stage planetary gearing offered on most of our winches, so torque and line speed are outstanding. A quiet, double-durable winch, pure and simple.

     
    XD9000 SPECS/PART NUMBERS
    Part Numbers: 
    PN 28500 CE (12V DC)
      $1,079.00
     PN 265012 CE (24V DC)  $1,279.00
    Rated Line Pull: 9000 lbs. (4080 kgs.) single-line
    Motor: 12V 4.6 hp, 24V 2.5 hp Series WoundTM
    Remote Control: Remote switch, 12' (3.7m) lead
    Geartrain: 3-Stage Planetary
    Gear Ratio: 156:1
    Lubrication: Aeroshell #17
    Clutch (freespooling): Sliding Ring Gear
    Brake: Automatic Direct Drive Cone
    Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
    Weight: 78 lbs. (35 kgs.)
    Wire Rope: 100', 5/16"diameter (30m, 8mm diameter)
    Fairlead: Roller
    Recommended Battery: 650 CCA minimum for winching
    Battery Leads: 2 gauge, 72" (1.83m)
    Finish: Argent Powder Coat
    Nuts/Bolts: PN 39625
    CE Winches: CE products are designed to meet European Standards. CE winches include CE labels, manuals, roller fairlead, safety hook and thimble.

     
    12V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 38(11.6) 70 amps 1/9000(4082)
    2000(910) 14.4(4.39) 180 amps 2/8190(3715)
    4000(1810) 11(3.35) 255 amps 3/7500(3402)
    6000(2720) 8.67(2.64) 330 amps 4/7010(3180)
    8000(3630) 6.88(2.10) 415 amps  
    9000(4080) 6.38(1.94) 460 amps  

     
    24V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 22.5(6.86) 46 amps 1/9000(4082)
    2000(910) 14.5(4.42) 93 amps 2/8190(3715)
    4000(1810) 11(3.35) 131 amps 3/7500(3402)
    6000(2720) 9.1(2.77) 169 amps 4/7010(3180)
    8000(3630) 7.9(2.41) 207 amps 5/6570(2980)
    9000(4080) 7.4(2.26) 226 amps  
     
    Above performance specs are based on first layer of drum

     

     
    Winch Dimensions: 21.8" L. x 6.3" D. x 7.6" H.
    (555mm L. x 160mm D. x 193mm H.)
    Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
       
    Premium Series: XD9000i Portable
    XD9000i MULTI-MOUNTTM PORTABLE
    All the power and reliability of the XD9000i in a portable package. No-load retrieval line speed is fast-38 feet/minute. Integrated control pack protects the winch's electrical components, and the 4.6hp Series WoundTM motor delivers big torque and power. Plugs into any standard 2" Class III receiver hitch and gives you the ability to move the winch from the front or back of your rig. Power is supplied through quick connect plugs. A good choice for full-size rigs and heavier recovery situations.

    This Kit includes winch, remote, carrier, 7.5' power lead with quick connect plug for front of vehicle and hawse fairlead. Front receiver and rear power lead sold separately.

     
    XD9000i MULTI-MOUNTTM SPECS/PART NUMBERS
    Part Number: PN 37441 $1,389.00
    Rated Line Pull: 9000 lbs. (4080 kgs.) single-line
    Motor: 12V 4.6hp, Series WoundTM
    Remote Control: Remote switch, 12' (3.7m) lead
    Geartrain: 3-Stage Planetary
    Gear Ratio: 156:1
    Lubrication: Aeroshell #17
    Clutch (freespooling): Sliding Ring Gear
    Brake: Automatic Direct Drive Cone
    Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
    Weight: 104 lbs. (47 kgs.)
    Wire Rope: 125', 5/16" diameter (38m, 8mm diameter)
    Fairlead: Hawse
    Recommended Battery: 650 CCA minimum for winching
    Battery Leads: Front heavy-duty 7.5'/2.2m with quick connect plug
    Finish: Argent Powder Coat

     
    12V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 38(11.6) 70 amps 1/9000(4082)
    2000(910) 14.4(4.39) 180 amps 2/8190(3715)
    4000(1810) 11(3.35) 255 amps 3/7500(3402)
    6000(2720) 8.67(2.64) 330 amps 4/7010(3180)
    8000(3630) 6.88(2.10) 415 amps 5/6570(2980)
    9000(4080) 6.38(1.94) 460 amps  

     
     
    Above performance specs are based on first layer of drum
    Premium Series: M8000
    M8000 SELF-RECOVERY WINCH
    Compact. Tough. An outstanding value for trucks, sport utility vehicles and Jeeps. The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done. Available with either 80' of wire rope and hawse fairlead or 100' of wire rope and roller fairlead. Pulls a fast 8 ft. per minute at rated load.

     
    M8000 SPECS/PART NUMBERS
    Part Number: PN 26502 CE (12V DC) 100' wire rope and roller fairlead
      $749.00
    Part Number: PN 265032 CE (24V DC) 100' wire rope, roller fairlead, safety hook and thimble
    $1,129.00
    Rated Line Pull: 8000 lbs. (3630 kgs.) single-line
    Motor: 12V 4.8 hp, 24V 2.1 hp, Series WoundTM
    Remote Control: Remote switch, 12' (3.7m) lead
    Geartrain: 3-Stage Planetary
    Gear Ratio: 216:1
    Lubrication: Aeroshell #17
    Clutch (freespooling): Sliding Ring Gear
    Brake: Automatic Direct Drive Cone
    Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
    Weight: 74 lbs. (34 kgs.)
    Wire Rope: 80', 5/16" diam. (24m, 8mm diam.) or 100', 5/16" diam. (30m, 8mm diam.)
    Fairlead for PN 20910: Hawse
    Fairlead for PN 26502, 265022, 265032: Roller
    Recommended Battery: 650 CCA minimum for winching
    Battery Leads: 2 gauge, 72" (1.83m)
    Finish: Argent Gray Powder Coat
    Nuts/Bolts: PN 39625

     
    12V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 42(12.8) 80 amps 1/8000(3629)
    2000(910) 16(4.88) 200 amps 2/7280(3302)
    4000(1810) 11.9(3.63) 285 amps 3/6670(3026)
    6000(2720) 9.79(2.98) 350 amps 4/6230(2826)
    8000(3630) 8.01(2.44) 435 amps  

     
    24V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 27.3(8.32) 46 amps 1/8000(3629)
    2000(910) 17.1(5.21) 99 amps 2/7460(3384)
    4000(1810) 12.6(3.84) 145 amps 3/3980(3166)
    6000(2720) 10.3(3.14) 190 amps 4/6620(3003)
    8000(3630) 8.8(2.68) 235 amps  
     
    Above performance specs are based on first layer of drum

     

     
    Winch Dimensions: 21.04" L. x 6.3" D. x 7.6" H.
    (534mm L. x 160m D. x 193mm H.)
    Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
       
    Premium Series: M8274-50
    M8274-50 SELF-RECOVERY WINCH
    Loved by off-roaders who compete, it's our fastest winch. No load retrieval speed for the M8274-50 is 73.4 feet per minute and that's not all. At 150 feet of 5/16" cable, it also has a very long line capacity. Its unique spur-gear drive train and upright design are totally rugged. Its braking system delivers smooth operation with superior heat dissipation. Roller fairlead, remote control on 12-ft. lead, free spool clutch and battery cables are included.

     
    M8274-50 SPECS/PART NUMBERS
    Part Numbers: 
    PN 38631(12V DC)   
    $1,959.00

    PN 375832  (24V DC)   $2,099.00

    Rated Line Pull: 8000 lbs. (3630 kgs.) single-line
    Motor: 12V 4.6 hp/3.43kw, 24V 2.5 hp/3.43kw, Series WoundTM
    Remote Control: Remote switch, 12' (3.7m) lead
    Geartrain: Spur Gear
    Gear Ratio: 134:1
    Lubrication: 6 oz. SAE 30 (non-detergent)
    Clutch (freespooling): Sliding Motor Pinion Gear
    Brake: Automatic, disc type
    Drum Diameter/Length: 3.5"/8.5" (9cm/22cm)
    Weight: 110 lbs. (50 kgs.)
    Wire Rope: 150', 5/16" diameter (46m, 8mm diam.)
    Fairlead: Roller
    Recommended Battery: 650 CCA for winching
    Battery Leads: 2 gauge, 72" (1.83m)
    Finish: Argent Gray Powder Coat with Clear Coat
    Nuts: PN 7616, L/W: PN 2146
    Bolts: PN 7165
    CE Winches: CE products are designed to meet European Standards. CE winches include CE labels, manuals, roller fairlead, safety hook and thimble.

     
    12V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 73.4(22.4) 55 amps 1/8000(3629)
    2000(910) 22(6.71) 190 amps 2/7460(3384)
    4000(1810) 12(3.66) 275 amps 3/6980(3166)
    6000(2720) 9.50(2.90) 350 amps 4/6620(3003)
    8000(3630) 6.10(1.86) 450 amps 5/6290(2853)

     
    24V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 65(19.8) 24 amps 1/8000(3629)
    2000(910) 23(7.01) 96 amps 2/7460(3384)
    4000(1810) 17(5.18) 149 amps 3/6980(3168)
    6000(2720) 13(3.96) 203 amps 4/6620(3005)
    8000(3630) 7.9(2.41) 273 amps 5/6290(2855)
     
    Above performance specs are based on first layer of drum

     

     
    Winch Dimensions: 16.5" L. x 8.5" D. x 15" H.
    (420mm L. x 220mm D. x 381 mm H.)
    Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
    Premium Series: M6000
    M6000 SELF-RECOVERY WINCH
    This is our medium-to-light duty winch. But it's no weakling. Designed to be compact, its 4.8 hp Series WoundTM motor can still pull 6,000 lbs., making it ideal for smaller vehicles with big ideas.

     
    M6000 SPECS/PART NUMBERS
    Part Numbers: 
    PN 45880 CE (12V DC)
     
    $809.00

    PN 465052 CE (24V DC)
    $1059.00
     

    Part Numbers:
    PN 37959 CE (12V, DC) Short Drum
     
    $789.00
    Rated Line Pull: 6000 lbs. (2720 kgs) single-line
    Motor: 12V 4.8 hp, 24V 2.1 hp, Series WoundTM
    Remote Control: Remote switch, 12' (3.7m.) lead
    Geartrain: 3-Stage Planetary
    Gear Ratio: 156:1
    Lubrication: Aeroshell #17
    Clutch (freespooling): Sliding Ring Gear
    Brake: Automatic Direct Drive Cone
    Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
    Weight: 74 lbs. (34 kgs.)
    Wire Rope for PN 45880, 458802, 465052: 80', 5/16" diameter (24m, 8mm diam.)
    Wire Rope for PN 37960: 50', 5/16" diameter (15m, 8mm diam.)
    Fairlead for PN 45880, PN 458802, PN465052: Roller
    Fairlead for PN 37960: Hawse
    Recommended Battery: 650 CCA minimum for winching
    Battery Leads: 2 gauge, 72" (1.83m)
    Finish: Argent Gray Powder Coat
    Nuts/Bolts: PN 39625
    CE Winches: CE products are designed to meet European Standards. CE winches include CE labels, manuals, roller fairlead, safety hook and thimble.

     
    12V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 48.5(14.8) 85 amps 1/6000(2722)
    2000(910) 23.7(7.22) 175 amps 2/5460(2477)
    4000(1810) 12.9(3.93) 360 amps 3/5000(2268)
    6000(2720) 10.0(3.05) 465 amps 4/4670(2118)

     
    24V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 37.1(11.31) 46 amps 1/6000(2722)
    2000(910) 20.3(6.19) 121 amps 2/5460(2477)
    4000(1810) 14.4(4.39) 185 amps 3/5000(2268)
    6000(2720) 11.2(3.41) 249 amps 4/4670(2118)
     
    Above performance specs are based on first layer of drum

     

     
    Winch Dimensions: 21.04" L. x 6.3" D. x 7.6" H
    (534mm L. x 160m D. x 193mm H.)
    Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
       
    Premium Series: M6000 SDP Portable
    M6000 SDP SHORT-DRUM PORTABLE
    A short-drum portable winch for light sport utility vehicles, the 4.8 hp M6000 SDP provides plenty of pulling power, can be mounted single-handedly, and stores in a snap. This compact winch comes complete with handle/mounting system for a Class III 2" receiver, hawse fairlead, remote control with 12' lead, free spool clutch, 50' of 5/16" wire rope and power lead with Quick Connect plug for the front of the vehicle. The perfect companion when you take your rig off-road, hunting, fishing or skiing.

    This Kit includes winch with built-in carrier, remote, power lead with Quick Connect plugs for front of vehicle and hawse fairlead. Front receiver and rear power cables sold separately.

     
    M6000 SDP SPECS/PART NUMBERS
    Part Number: PN 39116 $919.00
    Rated Line Pull: 6000 lbs. (2722 kgs) single-line
    Motor: 4.8 hp, Series WoundTM
    Remote Control: Remote switch, 12' (3.7m) lead
    Geartrain: 3-Stage Planetary
    Gear Ratio: 156:1
    Lubrication: Aeroshell #17
    Clutch (freespooling): Sliding Ring Gear
    Brake: Automatic Direct Drive Cone
    Drum Diameter/Length: 2.5"/5.0" (26.4cm/13cm)
    Weight: 72 lbs. (31 kgs.)
    Wire Rope: 50', 5/16" diameter (15m, 8mm diam.)
    Fairlead: Hawse
    Recommended Battery: 650 CCA minimum for winching
    Battery Leads: Front heavy-duty 7.5'/2.2m with quick connect plug
    Finish: Argent Powder Coat

     
    12V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)
    Line Speed
    FT./min(M/min.)
    Motor
    Current
    Pull by layer
    layer/Lbs(Kgs.)
    0 48.5(14.78) 85 amps 1/6000(2722)
    2000(907) 23.7(7.22) 175 amps 2/5460(2477)
    4000(1814) 12.9(3.93) 360 amps 3/5000(2268)
    6000(2722) 10.0(3.05) 465 amps 4/4670(2118)

     
     
    Above performance specs are based on first layer of drum
       
    Mounting Systems: Winch Carrier
     
    WINCH CARRIER
    Mount your WARN winch to this carrier for a portable winch configuration. Constructed of black coated steel. Predrilled to mount the  XD9000i, XD9000, M8000 and M6000 winches.

    Winch carrier and wiring for front of vehicle.
    PN 26370  $279.00

    Click here to return to main winch page

     

    Our online ordering system will keep all information provided completely secure using SSL encryption technology. Additionally, All information provided by you will be completely confidential. Pickup Specialties does not provide customer information, mailing list or other data to any outside firms or individuals.